FlipTop Touch Screen Crestron FT-TS600
32 • FlipTop Touch Screen: FT-TS600 Operations & Installation Guide – DOC. 7585B
Program Checks
Using Crestron Toolbox, display the “System Info” window (Tools | System Info)
and select the Functions menu to display actions that can be performed on the
FT-TS600.
Be sure to use Crestron Toolbox to create the FT-TS600 IP table.
1. Select Functions | IP Table Setup.
2. Add, modify or delete entries in the IP table. The FT-TS600 can have only
one IP table entry.
3. A defined IP table can be saved to a file or sent to the device.
Edit the control system’s IP table to include an entry for the FT-TS600. The entry
should list the FT-TS600’s IP ID (specified on the FT-TS600’s IP table) and the
internal gateway IP address 127.0.0.1.
To Next Page
Loading...
