Supplemental Guide – DOC. 7927G TSW-560/TSW-760/TSW-1060: Touch Screens• 71
EMS Software
To set up the EMS Software scheduling application on the touch screen:
NOTE: An EMS Software account is required to use this application. For more
information, visit www.emssoftware.com.
1. Access the touch screen web configuration interface. For more information, refer
to "Configuration via Web Interface" on page 27.
2. Navigate to Settings > Applications.
3. Select EMS from the Application Mode drop-down menu.
Settings - Applications (EMS)
4. Enter the URL of the corporate EMS account in the URL text field.
5. Reboot the touch screen. The EMS user interface is displayed on the touch screen
following the reboot.
EMS User Interface
To Next Page
Loading...
