CREVIS GT-5 Series User Manual

24 FnIO G-Series
Copyright(C)CREVIS Co.,Ltd Support +82-31-899-4599 URL: www.crevis.co.kr
2.2.6. Specification
Items
GT-5211
GT-5212
GT-5221
GT-5231
GT-5232
Specification
Transfer Channels
TxD, RxD, Full Duplex
TxD, RxD, Half Duplex
Transfer Rate
1200bps~115200bps
Data Bit
8bit
Parity Bit
None, Odd, Even(*Default : None)
Stop Bit
1bit, 2bit (*Default : 1bit)
Flow Control
RTS,CTS
-
Bit Distortion
<1.6%
-
Connection
10 RTB
Cable Type
Shield Cable Recommended.
Cable Length
Max.15m
1km twisted pair
Low Signal Voltage
-18V ~ -3V
-
High Signal Voltage
3V ~ 18V
-
Data Buffer
IO User data 14
bytes
IO User data 12
bytes
IO User data 14 bytes
IO User data 12
bytes
IO size changed
Max. 62 bytes
Control/Status 2
bytes
IO size changed Max. 62 bytes
Control/Status 2
bytes
Control/Status 1
byte,
Rx/Tx Length 1
byte
Rx/Tx Length 2
bytes
Control/Status 1 byte, Rx/Tx
Length 1 byte
Rx/Tx Length 2
bytes
RXD Buffer
1024bytes
TXD Buffer
1024bytes
Line Impedance
-
120Ω
Input Image Size
16 bytes
(*Default)
@ Max. 63
bytes
16 bytes @
Default_2
channels
16 bytes (*Default) @ Max. 63
bytes
16 bytes @
Default_2
channels
Output Image Size
16 bytes
(*Default)
@ Max. 62
bytes
16 bytes @
Default_2
channels
16 bytes (*Default) @ Max. 62
bytes
16 bytes @
Default_2
channels
General Specification
Power Dissipation
Max. 85mA @ 5.0Vdc
Isolation
I/O to Logic : Isolation
Logic to Field power : Isolation (Not used)
Logic to System Power : Non-isolation
Relative Humidity
5% ~ 90%

CREVIS GT-5 Series Specifications

General

Brand	CREVIS
Model	GT-5 Series
Category	Control Unit
Language	English