Skip to content
Manuals+
User Manuals Simplified.
Cricut Smart Cutting Machine Explore 3 Instructions
Home » Cricut » Cricut Smart Cutting Machine Explore 3 Instructions
Contents [ hide
1 Important Safety
Instructions
2 File Downloads
3 Related Manuals
Important Safety Instructions
Please read this entire document prior to setting up, operating, and servicing your Cricut’s smart cutting machine. Please follow the enclosed
instructions, online instructions, and other official Cricut instructional materials. For more safety and compliance information, go to cricut.00m/safety.
In these Instructions, the term “Machine’ means Cricut Explores 3.
WARNING: Risk of Injury. Fire, and Electric Shock.
Operating the Machine in a manner not prescribed in the enclosed instructions, online instructions, and other official Cricut
materials may result in damage to the Machine. property damage. Injury, or even death
Please note the following safety-related symbol appears on the Machine and Power Supply.
For Indoor Use Only. The machine is to be used in dry indoor locations only.
INDOOR USE ONLY. THE MACHINE IS INTENDED FOR INDOOR USE IN DRY LOCATIONS ONLY. DO NOT USE IN OR NEAR WATER. DO NOT
IMMERSE IN WATER OR ANY OTHER COULD.
The machine is intended to be operated by an adult only. Not intended for use by children 12 years or under. Always supervise children around
Machine.
Use Machine only for its intended crafting purpose.
Machine Is not Intended for use by persons with reduced physical, sensory or cognitive capabilities, or lack of experience and knowledge. unless they
are supervised by a person responsible for their safety and familiar with the safe operation of the Machine.
Disconnect the electrical power when not in use by unplugging the cord from the outlet.
Disconnect the electrical power by unplugging the cord from the outlet before servicing or cleaning. Do not expose the machine to temperatures above
38°C (100°F ).
Only clean the Machine with a soft cloth dampened with glass cleaner or water. Never use any kind of flammable liquid to clean Machine. Do not use
solvents such as acetone or nail polish remover to clean Machine as these will permanently damage Machine’s surfaces.
Always unplug Machine before replacing the cutting blade. Blades are extremely sharp and should be handled with caution and extreme care. Prevent
To Next Page
Need help?
General
