How do I set up my Cricut Explore or Cricut
Maker machine?
Completing machine setup automatically registers the machine to your account. To set up your
Cricut Explore, Explore One, Explore Air, Explore Air 2, or Cricut Maker machine, follow these
steps:
Windows/Mac
1. Plug in the machine and power it on.
2. Connect the machine to your computer with the USB cord or pair it via Bluetooth.
3. Go to design.cricut.com/setup in your browser.
4. Follow the on-screen instructions to sign in or create your Cricut ID.
5. Download and install the Design Space plugin when prompted (help article).
6. You will know the setup is complete when you are prompted to make your first project.
7. iOS/Android
1. Plug in the machine and power it on.
2. Pair your Android or iOS device with Cricut machine via Bluetooth.
3. Download and install the Design Space app (help article).
4. Launch the app, then sign in or create a Cricut ID.
5. Tap the menu and select Machine Setup & App Overview.
6. Select New Machine Setup.
7. Follow the on-screen prompts to complete setup.
8. You will know the setup is complete when you are prompted to make your first project.
How do I pair my Cricut Explore or Cricut
Maker machine via Bluetooth?
You can cut wirelessly using Cricut Maker and Cricut Explore machines via Bluetooth. Follow
the steps below to pair them with your computer or mobile device:
Note: Cricut Explore and Cricut Explore One require a Wireless Bluetooth Adapter to cut
wirelessly.
Windows
Mac
iOS
Android
To Next Page
Need help?
General
