blade contact with hands and body to avoid injury. Do not allow children to handle blades. Blades and other small pans are choking hazards and should
be kept and stored away from children.
Do not open, modify, or otherwise tamper with the Machine.
Do not operate if the Machine or cord is damaged. Contact Cricut Member Care for service: cricut.com/contact or USA and Canada: 1-877-727-4288 /
Mexico: 0800-266-0135.
Use only Cricut-approved power adapters. Always turn Machine OFF before unplugging from the electrical outlet. Never pull on the cord to disconnect
Machine from the electrical outlet; instead, grasp the plug and pull to disconnect Machine.
The machine has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug
does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
The power cord should be positioned so that it will not drape over the countertop or tabletop where it can be tripped over, snagged, or pulled on
unintentionally (especially by children).
Place Machine on a strong, flat, level, and stable surface. Make sure your workspace has enough space in the front and back of the Machine to allow
the cutting mat to move through the Machine freely.
Do not place your fingers or other objects in the Machine while connected to electrical power, or while the Machine is powered on, or during cutting
operations.
Keep hair, jewelry, loose clothing, fingers, other body parts, and any other items that could get caught in the moving parts away from the Machine while
it is operating as the rapid movements of the cutting carriage, mat, and material during operation may cause injury.
Do not touch the mat or material during cutting even if the mat or material stops moving. Do not touch the mat or material until the Machine ejects the
mat or material from Machine.
The machine should never be left or stored outside, in unheated or unairconditioned spaces, or in environments where the Machine can come in contact
with water.
Model: CXPL203
100-240 V-, 1.6 A, 50/60 Hz
File Downloads
Cricut Instructions
Smart Cutting Machine Explore 3
Download [optimized]
Download
Related Manuals
1. MAKER MADE M2 Automated Cutting Machine Kit User Guide M2 Automated Cutting Machine Kit SETTING UP YOUR M2 AUTOMATED...
2. HEASN Automatic Hot Stamping & Die-cutting Machine User Manual HEASN Automatic Hot Stamping & Die-cutting Machine Product name: SH-1060SEF...
3. INDESIT Washing Machine Instructions INDESIT Washing Machine Installation ! This instruction manual should be...
4. Splendide Washing Machine Instructions Washing Machine...
5. Breville Espresso Machine Instructions the Bambino™ BREVILLE RECOMMENDS SAFETY FIRST At Breville, we are...
6. Seeutek Heat Press Machine Instructions Heat Press Instruction https://www.youtube.com/embed/WI1Mq3HBVK8 Introduction Thanks for purchasing the Seeutek...
To Previous Page
Loading...
