EasyManua.ls Logo

CrimeStopper SP-402 User Manual

CrimeStopper SP-402
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SP-402
Combo Alarm & Remote Engine Starting System
OPERATING INSTRUCTIONS
INTRODUCTION
CONGRATULATIONS on your choice of the SP-402 by Crimestopper Security Products Inc. This booklet contains the
information necessary for operating your system. If any questions arise, contact your installation dealer or
Crimestopper Security Products Inc.
CONTACT INFORMATION:
TECHNICAL SUPPORT (800)-998-6880
Monday - Friday 8:00am - 4:30pm Pacific
Website: www.crimestopper.com
CRIMESTOPPER
SECURITY PRODUCTS, INC.
1770 S. TAPO STREET
SIMI VALLEY, CA. 93063
REV 09-2012
This device complies with FCC Rules part 15. Operation is subject
to the following two conditions: 1) This device may not cause
interference, and (2) this device must accept any interference that
may be received, including interference that may cause undesired
operation. The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modification to this
equipment. Such modification could void the user's authority to
operate the equipment.
Question and Answer IconNeed help?

Do you have a question about the CrimeStopper SP-402 and is the answer not in the manual?

CrimeStopper SP-402 Specifications

General IconGeneral
Remote ControlYes
Remote StartYes
Keyless EntryYes
Panic ModeYes
Shock SensorYes
Two-Way CommunicationYes
Operating RangeUp to 3000 feet
Arming ModeActive/Passive
Starter KillYes
Door TriggerYes
Valet ModeYes
System TypeCar Alarm
SirenYes
CompatibilityMost 12V vehicles

Summary

Using the Remote Transmitter

Lock / Arm

Explains how to lock doors and arm the security system using the remote.

Unlock / Disarm

Explains how to unlock doors and disarm the security system using the remote.

Remote Start

Instructions for starting the vehicle remotely using the transmitter.

Operating Instructions - Alarm

Arming and Locking

Details the process of arming the alarm system and locking the vehicle doors.

Disarming and Unlocking

Explains how to disarm the alarm system and unlock the vehicle doors.

Remote Engine Control

Unsuccessful Remote Start

Troubleshooting steps for when the remote start fails to operate.

Idle Down Mode

Anti Carjack Protection

Carjack Protection Overview

Overview of the carjack protection feature and its activation.

Alarm Trigger Diagnostics

Alarm Trigger Diagnostic Codes

Interpreting LED flashes to diagnose the cause of the last alarm trigger.

Remote Start Diagnostic Codes

Troubleshooting remote start failures using LED flash codes.

Transceiver / Remote Control Programming

Remote Transmitter Programming

Step-by-step guide on how to program remote transmitters to the system.

2 Vehicle Operation

Battery Replacement

Related product manuals