Need help?Do you have a question about the CrimeStopper CM-2500 and is the answer not in the manual?
Controls receiver power on/off.
Toggles between beep and vibration alert modes.
Activates backlight and mutes alerts.
Procedure for adding or replacing a receiver.
Connects to 12V positive ignition switch wire.
Connects to main module ground.
Connects to ignition wire for engine run detection.
Connects to start kill output or ignition wire for lock mode.
Connects to trunk switch trigger wire for trunk open icon.
Connects to positive trigger door switch wire.
Connects to hood pin for trunk/hood icons.
Detects impacts; adjust sensitivity for optimal performance.
Connects to ignition wire to detect engine status.
General| Brand | CrimeStopper |
|---|---|
| Model | CM-2500 |
| Category | Car Alarm |
| Language | English |
To Next Page