40 GB
decreasing the number (+ or -) and distance
counter value.
TIME + / -: Timer (display in hour : min : sec).
Press and hold the SET button
20
for 3 seconds
to change the timer settings. The LC display
will show the symbol for increasing or de-
creasing the number (+ or -) and timer coun-
ter value.
SCAN: Scan
Note: In scan mode, the display switches auto-
matically between the trip distance, maximum
speed, average speed and trip time.
Note: Refer to the “Changing basic settings“
chapter to configure the settings.
Note: To deactivate scan mode press the MODE
button
14
to return to ADVANCE mode.
CUSTOMIZE mode
Alongside ADVANCE and EASY mode, you can
also apply your own settings in CUSTOMIZE mode.
Press and hold the MODE button
14
for
3 seconds and press the SET button
20
to
enter the application profile setting.
Press MODE button
14
to select EASY mode.
To Next Page
Loading...
