Crivit HG00734A - Removing the Bicycle Computer from the Bicycle

43 GB
replace the battery, proceed as shown in figure A.
Open the battery compartment by turning the bat-
tery cap anticlockwise towards to the
icon us-
ing a coin. Remove the old battery and replace
this with a new battery. If required, remove the
battery by a sharp instrument (e.g. a screwdriver).
Please note the polarity when inserting the bat-
tery. This is shown in the battery compartment. En-
sure that the O-ring is attached correctly before
inserting the battery. Turn the battery cap clock-
wise towards to the
icon onto the battery com-
partment using a coin to close it. Press and hold
any button to return to normal operating mode.
Note: When the battery has been removed, all
information will be deleted after approx. 20 sec-
onds.
Removing the bicycle
computer from the bicycle
Turn the bicycle computer counter-clockwise
to remove it (Fig. K).
To remove the cable ties
2
using a suitable
tool such as a side cutter.