41 GB
EASY will be flashing on display. Press and
hold the SET button
20
to enter CUSTOMIZE
mode setting.
Press the SET button
20
again. Press the
MODE button
14
to activate or deactivate in-
dividual settings (i. e. CLOCK).
Select “ON“ to add the selected function to
EASY mode. Select “OFF“ if you do not wish
to add the selected function to EASY mode.
Press the SET button
20
to confirm your entry.
Press the MODE button
14
to proceed to the
next function and repeat the steps as de-
scribed above.
Press the MODE button
14
to exit settings.
Using the backlight
Note: To use the backlight function, it must be set
in advance. See “Changing basic settings”.
Press the SET button
20
to temporarily activate
the backlight. The backlight will switch off au-
tomatically after a short amount of time.
To Next Page
Loading...
