PLAY & CHARGE
The Neo S supports playing game software while also charging. Use
the USB-C connector port to charge the Neo S. The Status LED will
blink slowly when Neo S is charging.
STICK TOPPER REPLACEMENT
STEP 1
Remove each Topper by gently rotating and pulling upwards.
STEP 2
Replace a Topper by placing onto the stick and pressing down firmly.
13
SPECIFICATIONS
Design and specifications are subject to change without notice.
USB Charging cable: 1.0m (3.2ft), USB Cable: USB-C to USB Type-A, Wireless Connection: Bluetooth® 5.0+ED, Battery type: Li-ion,
Battery capacity: 750mAh, Charging Time: 2.5h, Input power rating: DC5V/ 1A, Voltage: 5.0V +/-0.2V,
Operating temperature: 0ºC--- 40ºC, Radio frequency: ISM 2.4G, Frequency band: 2402---2480MHz(1MHz),
Maximum radio-frequency: 0dbm
Mass: Approx. 167g
To Next Page
Loading...
Need help?
General