SETUP
CONNECT TO NINTENDO SWITCH™
Option 1: Bluetooth® (Pro Controller)
1) In settings, select the “Controllers and Sensors” and then select Change
Grip/Order. 2) Press and Hold the Home (CRKD) Button for 3 seconds to
enter pairing mode. The Home (CRKD) LED will blink fast in white. The Neo
S will then automatically connect to the Switch. 3) After successful
connection, you will see the controller highlighted in user 1/2/3/4 on the
Switch and Status LED on the Neo S will either be RED (1st player), BLUE
(2nd player), Yellow (3rd player), Green (4th player). Additional user Status
LED colors: Purple (5th player), Cyan (6th player)，Orange (7th player).
Option 2: Wired USB
1) Dock the Switch console into its base / stand and then the connect the
controller via the USB cable. The controller will automatically connect to
the Switch and the Home (CRKD) LED will keep lit in white. 2) After
removing the controller from the Switch, the controller will revert to
utilizing a Bluetooth® connection automatically.
2
3
4
Press when you are ready
A
CONNECTION STATUS
The Neo S Home (CRKD) Button has the following connection statuses:
Search/Reconnection mode, Pairing Mode and Connected.
NOTE: When the HOME (CRKD) button is SLOW blinking, Neo S is in search
mode. The Neo S can NOT go into pairing mode while in search mode. NEO
S must be powered OFF before going into pairing mode. Press and hold
the HOME (CRKD) button for 10 seconds to power OFF the Neo S.
03
Home (CRKD)
Button
Slow Blinking
Fast Blinking
Solid
Search / Reconnection
Mode
Pairing Mode
Connected
Description
To Next Page
Loading...
Need help?
General