CONNECTING TO MULTIPLE DEVICES
The Neo S can be connected to multiple devices.
1) Connect Neo S to an initial device (Refer to SETUP sections). 2) Press
and hold the HOME (CRKD) button for 10 seconds to power OFF the Neo
S. 3) Connect Neo S to another device using a dierent method.
NOTE: Refer to SETUP sections on how to connect the Neo S to
compatible devices. Power OFF the Neo S before connecting it to
another device. Neo S cannot be connected to multiple devices using the
same method.
SWITCHING BETWEEN DEVICES
If the Neo S is paired to multiple devices, it can be switched between devices seamlessly using dierent button combinations.
NOTE: The device that the Neo S is switched to will make it the main device. Pressing the Home (CRKD)
button will wake up the Neo S to the main device from OFF status.
SWITCH
MODE
XINPUT
ANDROID
Press dpad right and Home (CRKD) button to switch main device to
Switch (Pro Controller)
Press dpad up and Home (CRKD) button to switch main device to Xinput
device (PC / iOS / macOS)
Press dpad down and Home (CRKD) button to switch main device to
Android.
Make sure the Neo S has already been connected to multiple devices. The
Neo S has to be powered OFF before switching between devices.
06
To Next Page
Loading...
Need help?
General