Owner's Manual VE-1P Vertical Edger
Page 8 of 33
SECTION 3 (continued)
3) Check the entire edger for damage, especially in the area of any crate damage as
mentioned.
4) Use a proper lifting device and lifting slings to raise the machine and remove the
mounting skid from beneath the edger. Position the machine in the work area.
Remember that the main body of the machine weighs about 700 lbs. (317 kg.).
NOTIFICATION
Document all damage to the edger and components, if any, and notify the carrier and
CRL Glass Machinery.
.
To Next Page
