English
6
Radio Operation
1. Set the Function Switch to AM or FM position.
2. Rotate the Tuning Knob for desired radio station.
Note:
• The AM antenna is built inside the unit. If AM reception is poor, try to rotate the unit
for better reception.
• If the FM reception is poor, extend the FM Antenna on the back of the unit for better
reception.
Troubleshooting
There is no power
• No power at the power outlet.
• Ensure power plug is properly inserted.
• Replace batteries if using without power plug.
• To help save power consumption, some models will comply with ERP energy
saving standard. When there is no audio input for 20 minutes, their powers
will automatically cut-off. To turn power back on and resume playing, turn off
the power and turn it on again.
Bluetooth not connecting
• Forget the device then try connecting again.
• Ensure you are not too far away from unit when connecting.
• Power cycle both devices and try steps to connect again.
To Next Page
Loading...
Need help?
General
