The unit does not operate
1 The AC Power cord is not connected .
Make sure it is connected to an AC
outlet at the back of the unit.
2 The unit is not turn on : rotate the
VOLUME knob from the OFF
position.
Turntable
No sound is coming from unit.
1 The white protective needle cover was
not removed.
2 The volume is not turned on.
Tone arm will not move
1 Block tie-wrap was not removed from
underneath tone arm.
2 Tone arm hold down clip was not
released.
General
Troubleshooting
Plug Auxiliary cable into LINE IN JACK on
the front panel.
To Next Page
Loading...
