14
Removing an Alarm from a Wireless Network
In the event that an alarm must be removed from your network, the alarm’s
network data must be erased from its memory.
Press and hold the button on the front cover of
the alarm. The red FIRE light will flash rapidly
and the alarm will sound three tones.
Continue holding the button down.
Next, the WARNING light will begin to flash
yellow. Count 10 flashes of the yellow
WARNING light and release the button.
The alarm will chirp twice and all four of the
lighted icons will strobe on.
All network data has been erased from
the alarm. It will now perform as a single
station alarm or it can be joined to a new
network.
To Next Page
Loading...