EasyManua.ls Logo

CROSSJET AC92-18 - Compliance Information

CROSSJET AC92-18
296 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46
10. ES STATEMENT OF COMPLIANCE
pursuant to: Council Directive No. 2006/42/EC (Government directive NV 176/2008 Coll.)
Council Directive No. 2004/108/EC (Government directive NV 616/2006 Coll.)
Council Directive No. 2000/14/EC (Government directive NV 9/2002 Coll.)
A. We: Seco Group a.s., Šaldova 408/30, Prague 8
branch: 02 Jičín, Jungmannova 11
Corporate number: 60193450
issue the following statement:
B. Mechanical equipment
- name: Riding mower
- model: AC 92
- serial number:
Description:
AC 92 is a four-wheel self-propelled riding mower with a Briggs & Stratton 18HP, 20HP, 23HP engine. The
power drive from the engine is transferred by a V-Belt to the travel drive transmission with a continuously
variable gear and through an electromagnetic clutch to the mowing deck. The mowing deck is a single-
rotor assembly with a vertical axis of rotation and a coverage width of 92 cm. It has two rotating blades on
a single carrier. The mowed material is dispersed on the ground.
C. Legislation forming the basis for assessment of compliance:
EN 836+A1;2;3, EN ISO 3767-1;3, ISO 11684, EN ISO 11201, EN ISO 12100-2
Council Directive No. 97/68/EC (2002/88/EC)
D. Assessment of compliance was performed according to the designated procedure in:
- Council Directive No. 2006/42/EC, Article 5, (eqv. §5, para. 2 a), NV No. 176/2008 Coll.)
- Council Directive No. 2004/108/EC, Article 7, (eqv. §4, para. 1, NV No. 616/2006 Coll.)
- Council Directive No. 2000/14/EC, Annex VIII,(eqv.annex 7, NV No.9/2002 Coll.)
under the supervision of a notified person from LRQA registration number 0088
Hiramford, Middlemarch Office Village, Siskin Drive
Coventry CV3 4FJ, United Kingdom
E. We confirm that:
- this mechanical equipment defined above complies with the requirements in the above technical
regulations and under normal operating conditions it is s a f e.
- measures have been taken to ensure the compliance of all products introduced to the market with the
technical documentation and the requirements contained in technical regulations.
- guaranteed emission level of acoustic power is 100 dB(A).
Measured mean values of acoustic power depending on the engine used:
Engine Speed (min
-1
) Measured value of ac.power [dB(A)]
BRIGGS & STRATTON 18 HP VANGUARD 3000±100 97.47
BRIGGS & STRATTON 20 HP VANGUARD 3000±100 97.34
BRIGGS & STRATTON 23 HP VANGUARD 3000±100 97.58
Technical documentation in the extent as per attachment V is held by the manufacturer at:
Seco GROUP
odštěpný závod 02 AGS
Jungmannova 11
506 48 Jičín
In Jičín, on 1.10.2009 Ing. Jiří Pávek
Member of the Board of Directors

Table of Contents

Related product manuals