19
Alarm Specifications
Operating Voltage 3VDC
Battery Type Non-replaceable Lithium-Manganese
Fixed Temperature Settings 117ºF (47ºC)
135ºF (57ºC)
175ºF (79ºC)
Rate of Rise 20ºF (11ºC) / minute, > 100ºF (38ºC)
Space Rating 50 feet
Operating Ambient Temperature -20°F to 135°F (-29ºC to 57ºC)
Operating Humidity 10 - 95% Non-condensing
Alarm Dimensions 5.1” x 5.1” x 1.75”
Mounting Base Dimensions 5.0” x 5.0”
Weight 0.74 lbs
Listings UL; CSFM
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning this equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
(1) Reorient or relocate the units. (2) Increase the separation between the equipment
and receiver. (3) Connect the equipment into a different circuit from that to which the
receiver is connected. (4) Consult the dealer or an experienced technician for help.
FCC Caution: Changes or modifications not expressly approved by Applied Fire
Technologies LLC could void the user’s authority to operate the equipment.
To Next Page
Loading...