Crow Runner Series - Panel Diagnostic & Default Options

RUNNER - Installation & Config. Guide
188
Keypad “Medical” Alarm 4+2 Reporting Code
P195E 21E Keypad Medical Alarm 4+2 Code - Two digit value from 00-FF
Keypad “Medical” Alarm 4+2 Restore Reporting Code
P195E 22E Keypad Medical Alarm Restore 4+2 Code - Two digit value from 00-FF
Panel Diagnostic & Default Options
!
Display Panel Software Version Number
P200E 1E Display the Panel Software Version Number
Display Keypad Address Number
P200E 2E Display Keypad Address Number
Display Areas Assigned to this Keypad
P200E 3E Display Areas Assigned to this Keypad
Display Active Time Zones
P200E 4E Display Active Time Zones
Display Battery Voltage
P200E 5E Display Battery Voltage
Walk Test Mode
P200E 6E Walk Test Mode
Write to EEPROM (DTU) Board
P200E 7E Write to EEPROM (DTU) Board
Read from EEPROM (DTU) Board
P200E 8E Read from EEPROM (DTU) Board
Restore User & Installer Codes plus Telephone Numbers to Defaults
P200E 9E Restore User/Installer Codes & Telephone #’s to Default Values
Restore All Factory Defaults
P200E 10E Restore All Factory Defaults
Clear Alarm Memory Buffer
P200E 11E Clear Alarm Memory Buffer
Initiate a Call to the Call-back
P200E 12E Initiate a Call to the Call-back
Enter to Installer Mode
P200E 13E !Entry to Installer Mode!!!!4*680!)@+*>7@!.8(&6)!R*B&;!
Enter to RSSI Mode
P200E 14E !Entry to RSSI Mode!!!!!
!