Need help?Do you have a question about the Crow PowerWave 8 and is the answer not in the manual?
Introduction to the Crow Alarm Control System and its features.
Explains how premises are divided into zones and partitions for system configuration.
Details keys for system operation, arming, commands, and scrolling through events.
Describes keys used for entering codes, emergency, and programming.
Lists the various LED indicators on the keypad and their meanings.
Provides a table summarizing main system functions and their key presses.
Step-by-step guide on how to arm the alarm system when leaving a premises.
Instructions for arming the system in 'Stay' mode for when occupants are present.
Guidance on arming specific partitions (A or B) of the alarm system.
Explains how to temporarily exclude zones from system arming.
Describes the chime function for detecting entry into protected areas.
Details how to trigger panic, medical, or fire alarms.
How to disarm the system under duress, triggering a silent alert.
Explains how to view system status messages and error indicators.
How to identify and interpret system trouble indicators and messages.
Guide to viewing historical alarm and system events stored in memory.
Instructions on controlling external devices like door locks via the keypad.
Steps to access user or installer programming modes for system configuration.
Details on managing master and user access codes for the alarm system.
Procedure for modifying the primary master code for system access.
Guide to adding new user codes or changing existing ones.
Steps for removing a user access code from the system.
Instructions for setting the system's internal clock for scheduling functions.
Guide to programming up to four telephone numbers for communication.
How to use the system to control access to devices like electric locks.
Procedure for testing all detectors and system functionality.
Explains the functionality of controlling the alarm system via a telephone.
Describes how to control outputs locally from the keypad after entering a code.
General| Brand | Crow |
|---|---|
| Model | PowerWave 8 |
| Category | Control Panel |
| Language | English |
To Next Page
