7
Audible Signals
The keypad emits signals (beeps) in response to User activities. These signals are listed
in Table.
Table: List of Audible Signals
Sound Sequence Description
Short beep Once only A key in the keypad has been pressed
3 short beeps Once only Operation carried out successfully
Long beep Once only Illegal operation, or wrong key pressed
Slow beeping Through the Exit or
Entry delay time
Exit or entry delay warning when arming
the system indicates that you must exit the
protected area,
also Entry delay warning when entering
via the entry zone, to disarm the system.
Indicators
There are 14 LEDs indicators show the status of the system.
Zone and Status indicators LEDs 1- 8
Partitions indicators LEDs A, B
Ready Byp indicator
System indicator, Trouble indicator
Program indicator .
Summary of Functions
The system's main functions are listed in table
Function Keys Description Notes
Full
or Partition
Arm
C
C O D E
C
ENTER
Initiates full arm
Full Arm
C
ARM
Initiates full arm Only if enabled by
installer
Disarm
during exit
C
ARM
Disarms the
system during
exit delay
Only when slow beeping
is emitted
Disarm
C
C O D E
C
ENTER
Disarms the
system
Stopping Alarms
Arm Stay
C
STAY
C
C O D E
Initiates partial
alarm when the
user is home
Only if enabled by
installer
To Next Page
Loading...
