Need help?Do you have a question about the Crow Runner Series and is the answer not in the manual?
Details Crow's warranty policy for products, covering defects in materials and workmanship.
Explains the RUNNER SERIES system's purpose, advanced features, and capabilities.
Describes how premises are divided into zones and partitions for security.
Details the keys used for arming, setting changes, and scrolling history events.
Describes keys with symbols for arming, setting changes, and scrolling events.
Explains the use of keys for entering codes, initiating emergencies, or programming.
Explains the different audible beeps emitted by the keypad and their meanings.
Lists the LED indicators on the keypad and what they signify for system status.
Provides a table summarizing main keypad functions and their associated keys.
Explains how the system can answer incoming calls for remote access.
Details how to force a manual test call for dialer verification.
Describes how to use a touch-tone telephone for remote system control.
Explains how to control outputs and devices locally via the keypad.
Instructions on how to properly exit the user program mode.
Step-by-step guide to changing master and user codes on the LCD keypad.
Instructions for programming telephone numbers for system events.
Details the procedure for setting the internal clock and date on the system.
Explains how to arm different partitions (areas) of the system.
Guides on bypassing zones that cannot be sealed or are faulty.
Describes how to enable or disable the chime function for zones.
Explains how to activate panic, medical, and fire alarms.
Details the button combinations to trigger a panic alarm.
Details the button combinations to trigger a medical alarm.
Details the button combinations to trigger a fire alarm.
Explains how to use a duress code to silently report a threat.
Explains how to interpret system alarm indications on the keypad LEDs.
Describes how to read trouble messages indicating system failures or abnormal events.
Guides on viewing historical alarm and system events stored in memory.
Explains how to activate or halt external devices connected to the system.
Step-by-step process for changing the master code via the LCD keypad.
Instructions on adding new user codes or modifying existing ones on the LCD keypad.
Step-by-step instructions for removing a user code from the system.
Details the procedure for setting the internal clock and date on the system.
Explains how to activate the electric door lock release function.
Instructions for initiating and performing a walk-test of the alarm system.
How to increase or reduce the backlight intensity of the LCD screen and buttons.
How to adjust the frequency and volume of the keypad buzzer tone.
Steps to enter the local edit program mode for keypad customization.
List of direct addresses for programming specific LCD keypad settings.
Navigating the menu structure within the LCD keypad's local edit mode.
How to edit the single character identifier for system areas.
Procedure for renaming system zones as they appear on the keypad.
How to program custom names for system areas displayed on the keypad.
How to set a custom name for the keypad itself, displayed in idle mode.
How to assign names to users for identification in memory events.
How to name outputs for easier identification of controlled functions.
Restoring custom text fields to their default or last saved settings.
Restoring all customisable text fields on the keypad to factory defaults.
Transferring custom text from one LCD keypad to others on the same panel.
Procedures for exiting the local edit program mode and returning to idle.
Contacting installers and distributors for system queries and assistance.
General| Brand | Crow |
|---|---|
| Model | Runner Series |
| Category | Control Panel |
| Language | English |
To Next Page
