Crowcon Clip O2 - Page 27

27
Clip SGD
Software overview
1 Tab menus
File
• Load:Opentheinstalledsettings.(*cfg)
• Save:Savethecurrentsettings.(*cfg)
• Exit:Closetheprogram.
Tools
• Calibration:PerformtheZERO/SPANcalibration.
• LogRead:Retrievethelogevents.
• LogErase:Eraselogevents.
• SelfTest:TestifLED,LCD,Buzzer,vibration,batteryandtemperatureworkproperly.
• FirmwareUpgrade:Forthelatestrmwareversion,gotowww.crowcon.comorcontact
yourlocalserviceagent.Afterarmwareupdate,thedetectorMUSTberecalibrated.
• FactoryDefault:Removealldataandrestoretheinitialfactorysettings.Afterfactory
settingsarerestored,thedetectormustberecalibrated.
Help
• About:Displayabriefcompanyprole.
2 Tool Interface
• READ:Retrievesettings
• WRITE:Updateandadjustsettings.
• LOG:Displaythesavedlogevents.
• CALIBRATION:PerformtheZEROandSPANcalibration
• FIRMWAREUPGRADE:Upgradermware.
3 IR Link Interface
• InordertointeractwiththeClipSGDusingtheIRLink,click“OPEN”.WhentheClip
SGDsettingshavebeensuccessfullyretrieveduserswillsee“ReadComplete”.
4 Clip SGD Interface
• SerialNumber:Displayapresetserialnumber.
• FirmwareVersion:Displayarmwareversion.
• UserID/Message:Userscanprogramadesiredmessage/ID.
• Display:Userscanchoosetodisplayeithertherealtime“SensorReading”or“Sensor
LifeRemaining”
• Stealth(Option):Userscanturnoffthebuzzer,LED,andvibration.