Need help?Do you have a question about the Crowcon Gas-Pro and is the answer not in the manual?
Essential safety precautions and warnings for operating the Gas-Pro detector.
Procedure for charging the Gas-Pro battery in a non-hazardous area.
Procedure for powering on the Gas-Pro and its warm-up sequence.
Ensuring accurate sealing and monitoring pump performance during start-up.
Modes of operation for monitoring gases: diffusion and pumped.
Types of alarms (low battery, instantaneous, TWA) and their indications.
Accessing and using functions like home screen, manual zero, and pre-entry check.
Details on speedy and smart bump tests, and grouping for test regimes.
Interpreting fault messages, codes, and symbols displayed by the device.
Essential safety precautions and warnings for operating the Gas-Pro detector.
Procedure for charging the Gas-Pro battery in a non-hazardous area.
Procedure for powering on the Gas-Pro and its warm-up sequence.
Ensuring accurate sealing and monitoring pump performance during start-up.
Modes of operation for monitoring gases: diffusion and pumped.
Types of alarms (low battery, instantaneous, TWA) and their indications.
Accessing and using functions like home screen, manual zero, and pre-entry check.
Details on speedy and smart bump tests, and grouping for test regimes.
Interpreting fault messages, codes, and symbols displayed by the device.
General| Type | Portable Gas Detector |
|---|---|
| Display | LCD |
| Operating Temperature | -20°C to +50°C |
| Ingress Protection | IP65 |
| Sensor Type | Electrochemical, Infrared |
| Detection Gases | Oxygen |
| Alarms | Audible, Visual, Vibrating |
| Data Logging | Yes |
| Protection Rating | Intrinsically Safe (ATEX/IECEx) |
To Next Page
