To Next PageTo Next Page
Need help?Do you have a question about the Crowcon Xgard and is the answer not in the manual?
General| Sensor Type | Electrochemical, Infrared |
|---|---|
| Housing Material | Stainless steel |
| Output Signal | 4-20mA |
| Certification | ATEX, IECEx, UL |
| Gases Detected | Combustible gases, toxic gases, oxygen |
| Response Time | <30 seconds for most gases (depending on sensor type) |
| Display | LCD |
| Dimensions | Varies depending on model |
| Weight | Varies depending on model |
| Detection Range | Varies by gas and sensor type (e.g., 0-100% LEL for combustible gases) |
Explains detector use in hazardous areas based on certification types.
Details physical measurements and refers to diagrams.
Illustrates internal components and assembly, referencing diagrams.
Guidance on optimal placement for effective gas detection.
Instructions for physically installing the detector, sensor orientation.
Recommendations for cable types and installation standards for reliable connections.
Details terminal connections, polarity, and grounding for safe operation.
Guides to diagrams showing wiring for different Xgard types.
