Crowcon Gas-Pro - Certification labels

9
• Gas-Pro may be used in Zones 1 and 2, for Group llA, llB and llC gases and vapours and for
Temperature Classes T1, T2, T3 and T4. (see Certication labels below).
• Certication labels
The certication marking is as follows:
• Gas-Pro is certied for use in ambient temperatures in the range -20°C to +55°C (-4 to 131°F).
• Applicable Standards
Refer to equipment marking for conrmation of applicable certication before use.
IECEx
IEC 60079-0: 2013, 6th Edition
Explosive atmospheres – Part 0: Equipment - General requirements
IEC 60079-1:2007, 6th Edition
Explosive atmospheres – Part 1: Equipment protection by ameproof enclosures “d”
IEC 60079-11: 2012, 6th Edition
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety “i”
Ex d ia IIC T4 Gb Tamb -20°C to +55°C
IECEx ULD 11.0004X
UL certification label
CH4
1180
Um = 9.1V
WA RNING -
DO NOT CHA RGE THE BATTERY OR
CONNECT TO THE EQUIPMENT IN A
HAZARDOUS LOCATION.
REA D A ND UNDERSTA ND THE MA NUA L
B EFORE USE.
172 BROOK DRIVE
MILTON PARK, ABINGDON
OX14 4SD
UNITED KINGDOM
66Y6
T4 Tamb: -20°C to +55°C
FOR USE IN HA ZA RDOUS
LOCATIONS, CLA SS I, DIVISION 1,
GROUPS A , B, C & D.
ONLY AS TO INTRINSIC SA FETY
ATEX/ certification labelIECEx MED certification label
1180
CH4
II 2 G
IECEx ULD 11.0004X
DEMKO 11ATEX1031772X
WARNING
DO NOT CHARGE THE BATTERY OR
CONNECT TO THE EQUIPMENT IN A
HAZARDOUS LOCATION.
READ AND UNDERSTAND THE MANUAL
BEFORE USE.
172 BROOK DRIVE
MILTON PARK, ABINGDON
OX14 4SD
UNITED KINGDOM
Um = 9.1V
Ex d ia IIC T4 Gb -20°C ≤ Ta ≤ +55°C
Contents
Exit
Prologue
Operation
Gas testing
Maintenance
PC software
Accessories
Specication
Troubleshooting
Appendices
Warranty
Set-up