Crowcon Clip O2 - Page 3

⚠ CAUTION
• Thisdeviceisnotameasurementdevice,butagasdetector.
• Cleandetectorswithasoftclothanddonotusechemicalsubstancesforcleaning.
• Toensurea24monthsbatterylifeisattaineditisimportanttoavoidthefollowingactivities
asthiswilldepletethebatterylifetimetolessthan24months.
1. Allowing the detector to be in gas alarm frequently or for prolonged periods
(Normal Alarm Use: No more than 4 minutes alarm time per day)
2. Operating the detector user button frequently.
3. Connecting the detector with the Clip SGD IR Link frequently, except for regular bump
testing.
• Viewaserialnumberonthelabelatthebacksideofthedevice.(ex,20170101)
1. The serial number indicates below.
ex)SG0101001 2017(Year) 01(Months) 01(Day) 001(ManufactureOrder)