Operation Gasman
12
Peak test
When performing a Peak test, such as a vertical entry check,
previous readings can be cleared by selecting the Peak Reset menu
option
.
Zero
To perform Autozero, select the Zero function from the menu.
When Zero is completed, the instrument will return to normal Run
mode.
3. Run mode
The Gasman is now ready to use.
Familiarise yourself with the gas being monitored in your unit and
make sure you understand site health and safety procedures in the
event of alarm conditions.
OK
ppm
0.0
1. Scroll menus 2. Select
OK
ppm
Peak display
To Next Page
Loading...