Crowcon Triple Plus+ - Appendix 3 - Front Panel Text Items

29
Triple Plus+ and Triple Plus+ IR Appendix 3 – Front Panel Text Items
Appendix 3 – Front Panel Text
Items
This Appendix lists all the possible values the front-panel configuration param-
eters may take.
Top level configuration items – accessible by pressing the CAL button:
Text Description
MENU Enter configuration menu, passworded
LOG Enter data logging menu
ZERO* Zero all channels
EVENT Mark event in the data log
*Only present at this level if so selected via Portables PC.
MENU level configuration items:
Text Description/Options
ALARM Select alarm mode: INSTANT, ALL ACTIVE, TWA ONLY
BUTTN Select programmable button function: NOTHING, NORMAL, AVERAGE,
TWA TOXIC, PEAK HOLD, PUMP, SILENT ALARMS
CALIB Calibrate selected channel
DISPY Select display mode: NORMAL, AVERAGE, OFF, TWA TOXIC, PEAK
HOLD
FLAMM Select flammable correction factor: NO CORRECTION, …
LEVEL Allows setting of flammable alarm 1, 1% L.E.L. and alarm 2 level
LIGHT Select backlight timeout: ALWAYS ON, NO TIMEOUT, 10, 20 or 30
MINUTE TIMEOUT
MUTE Select SILENT ALARMS or AUDIBLE ALARMS
OFF Select instrument switch off mode :OFF ENABLED, OFF DISABLED
PUMP Pump on or off: GO, STOP
START Start up options: NOTHING, LOG, ZERO, ZERO & LOG
TIME Allows edit of instrument time (hours and minutes)
ZERO* Zero all channels
*Only if not selected to be at the higher level (via Portables PC).