Crown DriveCore I-Tech 4x3500 HD - 7.7.1 Amplifier DSP Selection Screen; 7.7.2 Amplifier Mode

Operation Manual
I-Tech HD DriveCore Series Power Ampliers
page 30
7.7.1 Amplifier DSP Selection Screen
On the left of this screen is the Input and Output Signal Level Monitor (explained later on this page). On the right
side are rows of DSP selection buttons for each channel. When you double click on a button, a control panel opens
for that button’s function.
Also on the right are buttons that open control panels for these functions:
• Amplier mode (dual, bridge-mono, input Y)
• Signal generator (pink noise and sine wave)
• Amplier information
• Recall and store presets
• Preset manager
• Apply to others (apply this amplier’s DSP settings to other devices)
We’ll explain each of these functions on the next several pages.
7.7.2 Amplifier Mode
This is accessed by double clicking the mode button.
7 Advanced Operation