Do you have a question about the Crown I-Tech I-T6000 and is the answer not in the manual?
Channels | 2 |
---|---|
2 Ohms Power Per Channel | 3000W |
4 Ohms Bridged Power | 6000W |
Input Impedance | 20 kOhms balanced, 10 kOhms unbalanced |
Input Sensitivity | 1.4V |
Damping Factor | > 500 |
Frequency Response | 20 Hz - 20 kHz |
Signal to Noise Ratio | > 105 dB |
Connectors Input | XLR |
Connectors Output | Neutrik Speakon |
Height | 3.5 inches (2U) |
Dimensions | 19" x 3.5" x 16.2" |
Weight | 28 lbs |
Power Requirements | 100V-240V ~ 50/60 Hz |
Lists output power for I-Tech models across different impedance loads.
Details power consumption and heat output based on load conditions.
Covers analog and AES/EBU input connections for I-Tech amplifiers.
Explains binding post and Speakon output connectors and line loss.
Details how to connect I-Tech amps via IQ Network for setup and control.
Optimizing gain structure for signal-to-noise ratio and output levels.