Operation Manual
I-Tech HD DriveCore Series Power Ampliers
page 34
7.7.6 CobraNet Advanced Settings
In the CobraNet Advanced Settings screen you can set the
parameters shown here. Indicators that are green can’t be
modified.
The latency on this screen is the CorbaNet transport latency or
buffering. This latency must be set to the same latency as the
source CobraNet device.
The Foldback control panel lets you select the items to
transmit via CobraNet. Selections available are the Analog
Inputs, Amplifier Outputs or AES input signal. The audio can
be routed out through only one bundle.
4 Advanced Operation
To Next Page
Loading...
