Crown Macro-Tech 3600VZ User Manual

Model:
Macro-Tech 3600VZ
Some models may be exported under the name Amcron .
®
125113-3
4/00
©2000 by Crown International, Inc., P.O. Box 1000, Elkhart, IN 46515-1000 U.S.A. Telephone: 219-294-
8000. Fax: 219-294-8329. Macro-Tech amplifiers are produced by the Professional Audio Division of Crown
International,Inc.Trademark Notice: SmartAmp,
™
PIP,
™
and Grounded Bridge
™
are trademarks and
Amcron ,
®
Crown ,
®
Macro-Tech ,
®
IOC ,
®
ODEP ,
®
IQ System ,
®
and P.I.P.
®
are registered trademarks of Crown
International, Inc. Other trademarks are the property of their respective owners.

Crown Macro-Tech 3600VZ Specifications

General

Power Output (Bridge-Mono, 4 ohms)	3600W
THD	< 0.05%
Signal to Noise Ratio	> 105 dB
Input Sensitivity	1.4V
Input Impedance	20k ohms balanced, 10k ohms unbalanced
Power Output (Stereo, 2 ohms)	1800W per channel
Cooling	Forced air
Power Requirements	120V, 50/60Hz

Summary

Installation

Mounting and Cooling

Guidelines for rack mounting, airflow, and preventing overheating.

Wiring Overview

Explains connecting inputs and outputs for Stereo, Bridge-Mono, and Parallel-Mono modes.

Input Connection Methods

Details on connecting balanced XLR and phone jack inputs, including wiring techniques.

Output Connection and Cable Gauge

Guidance on connecting loudspeakers, including connector types and wire gauge selection.

Load Protection and Power Requirements

Operation

Safety Precautions and Indicators

Protection Circuits

Overview of built-in protection systems like ODEP, standby, and circuit breakers.

Controls and Settings

Details on front/rear panel controls, input sensitivity, and ground lift switches.

Service

Worldwide Service

North American Service