Crown Macro-Tech 5000i - User Manual

Macro-Tech
®
i Series
Macro-Tech 5000i, 9000i, 12000i
power amplifi ers for touring sound
Features
• The Macro-Tech
®
i Series continues the Crown
®
Macro-Tech legacy of unparalleled sonic accuracy and
detail, putting sound quality above all else
• Patented, cutting-edge Class-I circuitry gets more
power out of an amplifi er with less waste
• Rugged construction ensures that all Macro-Techs are
built to withstand years of abuse on the road
2-ohm Dual (per ch.)
Model Name
20 mS
BURST
20 Hz - 20
kHz 1 kHz
4-ohm Dual
(per ch)
8-ohm Dual
(per ch)
4-ohm
Bridge
8-ohm
Bridge
MA-5000i 2,565W
1,800W 1,800W 2,000W 1,250W 3,600W 4,000W
MA-9000i 4,570W
2,500W 2,500W 3,000W 1,500W 5,000W 6,000W
MA-12000i 5,900W
3,500W 3,500W 4,000W 2,100W 7,000W 8,000W
Power Output Guaranteed minimum power in watts at 20 Hz-20 kHz with 0.35% THD
• Global Power Supply — designed to deliver maximum power
no matter what country you work in
• Built-in load, line voltage, input and output monitoring
• Standard Ethernet networking via System Architect
®
lets
system operators monitor and control the amplifi er from any
location

Crown Macro-Tech 5000i Specifications

General

Channels	2
Frequency Response	20 Hz - 20 kHz
Total Harmonic Distortion (THD)	< 0.5%
Damping Factor	> 500
Input Sensitivity	1.4 V
Signal to Noise Ratio	> 100 dB
Cooling	Forced Air
4 Ohm Bridge	2000 W
Weight	28 lbs
Height	3.5 in
Width	19 in
Input Impedance	10 kOhm balanced

Summary

Product Features

Amplifier Specifications

Performance Metrics

Details technical performance like frequency response, THD, SNR, damping factor, and crosstalk.

Front Panel Controls and Indicators

Explains front panel buttons, LEDs, and indicators for operation status and control.

Back Panel Controls, Connectors, and Indicators

Details rear panel connections, switches, and indicators for connectivity and setup.

Firmware and Software Capabilities

Information on software features, updates, system integration, and monitoring tools.

Construction and Protection

Covers physical attributes like dimensions, weight, cooling, and amplifier protection mechanisms.