To Next PageTo Next Page
Need help?Do you have a question about the Crown POWER-TECH 1 Series and is the answer not in the manual?
Details the warranty coverage for Crown products globally, outlining terms and conditions.
Details the warranty coverage for Crown products in North America, outlining terms and conditions.
Lists items and conditions not covered by the warranty, including damage and exclusions.
Provides instructions on how to initiate warranty service, including notification and shipping.
Covers legal remedies, warranty alterations, and design change policies.
Warns users about the dangers of electric shock and precautions to prevent it.
Advises on safe operating environments, avoiding moisture and heat.
Explains the meaning of warning symbols like lightning bolts and exclamation marks.
Discusses the amplifier's magnetic field and its potential effect on nearby equipment.
Instructions for safely unpacking the new amplifier and checking for transit damage.
Highlights the main features and benefits of the Power-Tech amplifier series.
Guides on connecting the amplifier for standard stereo operation.
Details on setting up the amplifier for Bridge-Mono and Parallel-Mono modes.
Instructions for changing the amplifier's input sensitivity settings.
Methods for protecting loudspeakers using fuses based on power and impedance.
Specifies the required AC mains voltage, frequency, and plug types.
Key safety and operational guidelines to follow during use.
Details the function of the Enable and Signal/IOC indicators.
Explains the Output Device Emulation Protection (ODEP) system.
Describes ultrasonic, RF, and drive protection features.
Details the transformer's thermal protection against overheating.
Information on internal fuses and circuit breakers for power supply protection.
Explains the function of the power switch and level controls.
Instructions for cleaning the air intake filter for optimal cooling.
Details frequency response, signal-to-noise, distortion, and damping factor.
Provides guaranteed minimum output power for various modes and loads.
Specifies safe load impedances and required AC mains power.
Details front panel controls, indicators, and input/output connectors.
Explains the amplifier's protection systems and turn-on delay.
Describes the chassis, cooling, dimensions, and weight.
Minimum power output for Power-Tech 1 in stereo mode across different loads.
Minimum power output for Power-Tech 1 in bridge-mono mode across different loads.
Minimum power output for Power-Tech 1 in parallel-mono mode across different loads.
Minimum power output specifications for the Power-Tech 2 amplifier.
Minimum power output specifications for the Power-Tech 3 amplifier.
Maximum power output for Power-Tech 1 during single cycle bursts.
Maximum power output for Power-Tech 1 during 40ms tone bursts.
Maximum power output specifications for the Power-Tech 2 amplifier.
Maximum power output specifications for the Power-Tech 3 amplifier.
Describes the MT-XLR accessory for XLR input connections.
Describes the MT-BB accessory for barrier strip input connections.
How to obtain service for Crown products globally through authorized centers.
Options for service in North America via centers or the factory.
Guidelines for safely packing and shipping units for factory service.
General
