Crown XLi 1500 User Manual

Obtaining Other Language Versions: To obtain information in another language about the use
of this product, please contact your local Crown Distributor. If you need assistance locating your
local distributor, please contact Crown at 574-294-8000.
This manual does not include all of the details of design, production, or variations of the equipment.
Nor does it cover every possible situation which may arise during installation, operation or
maintenance.
The information provided in this manual was deemed accurate as of the publication date. However,
updates to this information may have occurred. To obtain the latest version of this manual, please
visit the Crown website at www.crownaudio.com.
Later versions of this manual and additional information about this product may be available at the
Crown website at www.crownaudio.com.
Trademark Notice: Crown and Crown Audio are registered trademarks of Crown International.
Other trademarks are the property of their respective owners.
©2012 by Harman International. 1718 W. Mishawaka Rd., Elkhart, Indiana 46517-9439 U.S.A.
Telephone: 574-294-8000
Models: XLi 800, XLi 1500, XLi 2500, XLi 3500
XLi Series Operation Manual
5015442 - 04/12

Crown XLi 1500 Specifications

General

Damping factor	200
Amplifier class	-
Frequency range	20 - 20000 Hz
Input sensitivity	1400 mV
Audio output channels	2.0 channels
Peak power per channel	- W
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.5 %
Bridge-mode power output per channel (8 Ohm)	900 W
AC (power) in	Yes
Speakers connectivity type	XLR / 1/4\
Product color	Black
Connectivity technology	Wired
Built-in display	No
Maximum current	15 A
AC input voltage	120-240 V
AC input frequency	50 - 60 Hz
Power protection features	Short circuit
LED indicators	Activity, Power

Weight and Dimensions

Depth	315 mm
Width	483 mm
Height	89 mm
Weight	12700 g

Summary

Safety and Compliance

General Safety Guidelines

Lists 19 essential safety instructions for operating the apparatus safely.

Warning Symbols

Explains warning symbols (lightning bolt, exclamation point) and their meanings.

Magnetic Field Caution

Caution regarding placing sensitive equipment near the amplifier due to its magnetic field.

FCC Compliance Statement

Information regarding compliance with FCC rules for Class B digital devices.

Regulatory Compliance

EMC and Safety Standards

Lists EMC and Safety standards the product conforms to, including directive numbers.

Front Panel Controls and Indicators

Front Panel Controls

Details the Gain Control for output level and the Power Switch for operation.

Status LED Indicators

Explains Power, Fault, Signal Presence, and Clip LEDs indicating amplifier status.

Physical Front Panel Elements

Describes the Rack-Mount Hole and the front-to-back ventilation Grill.

Back Panel Connectivity and Features

Power Input and Circuit Protection

Covers the AC Power Connector and Circuit Breaker for overload protection.

Cooling System

Details the cooling fans providing forced airflow for temperature regulation.

Rear Panel Connectivity

Explains Input/Output Connectors, Mode Switch, and Sensitivity Switch.

Stereo Wiring

Speakon Connector Wiring

Guides on wiring speakers using Speakon connectors in Stereo mode.

Binding Post Wiring

Guides on wiring speakers using Binding Post connectors in Stereo mode.

Bridge-Mono Operation

Bridge-Mono Speakon Wiring

Instructions for setting up bridge-mono mode with Speakon connectors.

Bridge-Mono Binding Post Wiring

Instructions for setting up bridge-mono mode with Binding Post connectors.

Parallel Wiring

Parallel Speakon Wiring

Guides on wiring speakers using Speakon connectors in Parallel mode.

Parallel Binding Post Wiring

Guides on wiring speakers using Binding Post connectors in Parallel mode.

Technical Specifications

Power Output Specifications

Details guaranteed minimum power output for different impedances and modes.

Performance Metrics

Lists key performance metrics like frequency response, distortion, and slew rate.

Connectors and Controls List

Describes input/output connectors, front/rear panel controls, and indicators.

Construction and Physical Data

Covers protection features, ventilation, cooling, dimensions, and weight.

Warranty and Support

Warranty Coverage Summary

Outlines the limited warranty period, coverage, and exclusions for the product.

How to Obtain Warranty Service

Provides instructions on how to obtain warranty service and support.

Warranty Legal Disclaimers

Includes disclaimers for consequential damages and warranty alterations.