Crown XLi 3500 User Manual

Obtaining Other Language Versions: To obtain information in another language about the use
of this product, please contact your local Crown Distributor. If you need assistance locating your
local distributor, please contact Crown at 574-294-8000.
This manual does not include all of the details of design, production, or variations of the equipment.
Nor does it cover every possible situation which may arise during installation, operation or
maintenance.
The information provided in this manual was deemed accurate as of the publication date. However,
updates to this information may have occurred. To obtain the latest version of this manual, please
visit the Crown website at www.crownaudio.com.
Later versions of this manual and additional information about this product may be available at the
Crown website at www.crownaudio.com.
Trademark Notice: Crown and Crown Audio are registered trademarks of Crown International.
Other trademarks are the property of their respective owners.
©2012 by Harman International. 1718 W. Mishawaka Rd., Elkhart, Indiana 46517-9439 U.S.A.
Telephone: 574-294-8000
Models: XLi 800, XLi 1500, XLi 2500, XLi 3500
XLi Series Operation Manual
5015442 - 04/12

Crown XLi 3500 Specifications

General

Frequency Response	20 Hz - 20 kHz, +0/-1 dB
Signal to Noise Ratio	> 100 dB
Total Harmonic Distortion	< 0.5%
Input Sensitivity	1.4V
Number of Channels	2
Input Impedance	20 kOhms balanced, 10 kOhms unbalanced
Power Output (4 Ohms)	1000W
Dimensions	19" x 3.5" x 12.4"
Power Requirements	120VAC, 60Hz
Cooling	Forced-air cooling
Connectors	Input: XLR, Output: Binding posts

Summary

Important Safety Instructions

Warning Symbols and Precautions

Identifies and explains warning symbols and cautions to prevent injury or damage.

Magnetic Field Advisory

Advises on placement of sensitive audio equipment to avoid magnetic interference from the amplifier.

FCC Compliance Statement

Details the product's compliance with FCC regulations regarding radio frequency emissions.

Declaration of Conformity

EMC and Safety Standards Compliance

Lists the specific EMC and safety standards met by the product, including test conditions.

Front Panel Overview

Front Panel Components

Details the function and indicator LEDs of the amplifier's front panel controls and features.

Back Panel Features

Back Panel Connectivity and Controls

Describes the rear panel connectors, switches, and protective features like circuit breaker and fans.

Wiring Configurations

Stereo (Dual) Wiring

Instructions for connecting speakers in stereo mode using Speakon or binding post connectors.

Bridge-Mono Wiring

Guidance for connecting a single speaker in bridge-mono mode for doubled output power.

Parallel Wiring

Instructions for wiring speakers in parallel mode, sending one signal to both channels.

Specifications

Performance Specifications

Details guaranteed minimum power, frequency response, distortion, slew rate, and signal-to-noise ratio.

Connectors and Controls

Lists all input/output connectors, front panel controls, and rear panel switches.

Construction and Dimensions

Provides information on protection features, ventilation, cooling, dimensions, and weight.

Warranty Information

Worldwide Limited Warranty (Excluding USA & Canada)

Details the one-year limited warranty, exclusions, and procedures for obtaining service.