To Next PageTo Next Page
Need help?Do you have a question about the Crown Xs Series and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| 4 Ohm Stereo Power | 500W per channel |
| 8 Ohm Bridged-Mono Power | 1000W |
| Signal to Noise Ratio | >100dB |
| THD | <0.5%, 20 Hz - 20 kHz |
| Frequency Response | 20 Hz - 20 kHz, +0/-1 dB |
| Power Output (4 ohms) | 500W per channel |
| Total Harmonic Distortion | <0.5%, 20 Hz - 20 kHz |
| Input Impedance | 20 kOhm balanced, 10 kOhm unbalanced |
| Dimensions | 19" x 3.5" x 15.5" (483 x 89 x 394 mm) |
Details the key features of the Xs Series amplifiers, including chassis, cooling, inputs, and controls.
Guides users on how to effectively use the manual and the importance of product registration.
Instructions for unpacking and inspecting the amplifier for any transit damage.
Guidance on safely disconnecting power and installing the amplifier in an equipment rack.
Recommendations for maintaining airflow and preventing overheating by proper rack mounting.
Recommendations for selecting appropriate input wiring and connector types for balanced/unbalanced signals.
Guidance on selecting speaker wire gauge and connector types for amplifier output.
Details wiring for stereo, parallel inputs, and bridge-mono modes for amplifier connections.
Instructions for safely connecting the amplifier to the AC power source.
Advice on preventing speaker damage from clipping and subsonic signals.
Step-by-step guide for safely powering on the amplifier and setting initial levels.
Essential precautions for safe and optimal operation of the amplifier.
Explanation of front panel controls, buttons, knobs, and status indicator LEDs.
Description of rear panel connections, switches, and circuit breaker.
Overview of amplifier protection and diagnostic capabilities, including limiting and DC protection.
Details how output current limiting protects the amplifier from short-circuit loads.
Explains DC protection that mutes channels if output DC offset exceeds 2V.
Information on circuit breaker ratings for different models and supply voltages.
Explains the thermal protection circuit that activates when heatsink temperatures are too high.
Procedures for obtaining service for units outside the US, including contacting representatives.
Covers service at US centers, factory service, shipping, packing, estimates, and payment.
General warranty statement, coverage period, and defects covered for new Crown products.
Details items excluded from warranty and conditions that may void the warranty.
Instructions on how to contact Crown and initiate warranty service within the warranty period.
Covers disclaimers for damages, warranty alterations, and purchaser's legal rights.
