Crown XTi 1002 User Manual

Obtaining Other Language Versions: To obtain information in another language about the use of this product, please contact your local Crown Distributor. If you need
assistance locating your local distributor, please contact Crown at 574-294-8000.
This manual does not include all of the details of design, production, or variations of the equipment. Nor does it cover every possible situation which may arise during
installation, operation or maintenance.
The information provided in this manual was deemed accurate as of the publication date. However, updates to this information may have occurred. To obtain the latest
version of this manual, please visit the Crown website at www.crownaudio.com.
Trademark Notice: Crown, Crown Audio, and Amcron are registered trademarks of Crown International. Other trademarks are the property of their respective owners.
Later versions of this manual and additional information about this product may be available at the Crown website at www.crownaudio.com.
Some models may be exported under the name Amcron
®
©2011 by Harman International, 1718 W. Mishawaka Rd., Elkhart, Indiana 46517-9439 U.S.A. Telephone: 574-294-8000.
XTi 1002
XTi 4002
XTi 2002
XTi 6002
XTi2 Series Operation Manual
143060-2 - 4/11

Crown XTi 1002 Specifications

General

8 Ohm Bridge	1000W
4 Ohm Bridge	1400W
Total Harmonic Distortion (THD)	< 0.5%
Signal to Noise Ratio (SNR)	> 100dB
Input Sensitivity	1.4V
Damping Factor	> 500
Dimensions	19" x 3.5" x 12.4" (48.3 cm x 8.9 cm x 31.5 cm)
Frequency Response	20Hz - 20kHz
Input Impedance	20 kOhms (balanced), 10 kOhms (unbalanced)
Protection	Thermal, short circuit, DC
Power Supply	100V-240V ~ 50/60 Hz
Power Output (2 Ohms)	700W
Power Output (4 Ohms)	500W
Power Output (8 Ohms)	275W

Summary

Important Safety Instructions

General Safety Warnings

General safety guidelines and warnings for amplifier operation.

Magnetic Field Warning

Caution about strong magnetic fields affecting sensitive equipment.

FCC Compliance Notice

Details the amplifier's compliance with FCC rules.

Get Started

Stereo DSP Off

Explains the factory default stereo mode with processing disabled.

Factory Preset #2: BRIDGE

Details how to configure the amplifier for bridged (mono) operation.

Factory Preset #3: XOVER

Explains setting up the amplifier for crossover (bi-amp) operation.

Factory Preset #4: BRG SUBS

Describes configuring for bridged subwoofer operation with a low-pass filter.

Factory Preset #5: SUBSYNTH

Details setting up for subwoofer use with SubHarmonic Synth.

Ensure Proper Cooling

Provides guidelines for ensuring adequate ventilation and cooling for the amplifier.

Welcome

Product Overview and Innovation

Introduces the XTi2 Series amplifiers and their advanced features.

Next Generation Features

Highlights key advanced features of the XTi2 Series amplifiers.

How to Use This Manual

Guides users on how to effectively read and utilize the operation manual.

Front Panel Features

Indicators and Controls Overview

Explains front panel LEDs, controls, and the LCD screen.

Back Panel Features

Model-Specific Connectors

Details back panel connectors and features for different XTi2 models.

Front Panel Navigation

Menu Tree and Navigation Basics

Illustrates menu structure and basic navigation using buttons.

Integrated Processing Features

Input and Output Modes

Explains Stereo, SUM, Input Y, and Bridge-Mono modes.

Subharmonic Synth and Equalization

Details Subharmonic Synth for low frequencies and EQ filter capabilities.

Crossover, Delay, and Limiter

Describes crossover filters, delay for alignment, and the Peak Plus limiter.

Advanced Thermal Control and Monitoring

Explains adjustable fan modes and software visibility of system parameters.

Front Panel Lock-Out

Details how to lock/unlock front panel buttons via buttons or software.

Service

Worldwide and Regional Service Options

Outlines procedures for obtaining service globally and in North America.

Factory Service Procedures

Details the process and requirements for sending units for factory repair.

Packing and Payment for Service

Provides guidelines for packing units and payment for non-warranty repairs.

Warranty - UNITED STATES & CANADA

Warranty Summary and Exclusions

Provides a summary of warranty terms and lists excluded items.

Obtaining Warranty Service

Outlines the steps for initiating warranty service and provider obligations.

Disclaimers and Legal Rights

Disclaims liability for damages and informs about legal remedies.

Warranty - WORLDWIDE EXCEPT USA & CANADA

Warranty Summary and Exclusions

Summarizes warranty terms and lists items not covered for international regions.

Obtaining Warranty Service

Explains the process for obtaining warranty service internationally.

Disclaimers and Legal Rights

Disclaims responsibility for damages and informs about legal remedies.

PRODUCT REGISTRATION

Owner's Information

Section for owners to print their personal details for registration.

Product Information

Fields for entering product model, serial number, and purchase date.

Crown Audio Factory Service Information

Service Information Fields

Fields for product return details and payment options for service.

XTi2 Specifications

Performance Metrics

Details sensitivity, frequency response, SNR, THD, damping, crosstalk, and input impedance.

Electrical and Environmental Specs

Covers AC line voltage, current, and operating temperature.

Front Panel Indicators

Explains the function of each LED indicator on the front panel.

Front Panel Controls

Describes the operation of level controls, power switch, and navigation buttons.

Integrated Processing Features

Details EQ, crossover, delay, synth, limiter, and presets.

Input/Output Connectors

Lists and explains all input, output, and link connectors.

Construction and Physical Specs

Covers chassis, cooling, dimensions, and weight.