Crown XTi 1002 Specifications

There’s no debate – when you choose Crown’s XTi 2 Series, you’re choosing one of the
most powerful and innovative amplifiers on the market today. That’s because the all-new
XTi 2 Series amps continue to set the standard for unmatched performance and value,
delivering the goods night after night without breaking a sweat.
With such innovations as a universal tracking switch-mode power supply and a fully
integrated suite of speaker processing tools, these amps are at the top of their class
when it comes to thermal eciency and system flexibility.
You also have greatly improved control capabilities. The addition of Peakx Plus™ Limiters
gives you full command over threshold, attack and release, and we enhanced the
Subharmonic Synth so you can easily manage frequency, gain and filter type, allowing
for application-specific tuning.
Plus, you’ll now be able to tailor fan speed for specific applications and have software
visibility of the Power Supply Temperature and AC Line Voltage. Combine all of that with
integrated cast-aluminum rack handles for maximum durability and portability and you
have the power to move you – and the world.
NEXT GENERATION FEATURES:
 Peak
x
Plus™ Limiters provide the ultimate in system performance
and protection by allowing full control over threshold, attack,
and release
 
over frequency, gain and filter type for system-specific tuning
 
speed – for matching fan performance to a specific application
 
AC line voltage and power supply temperature
 
are user definable
 
and enhanced durability
 
between the amplifier and power cord
 
control software
Ω Stereo (per channel) 700W
Ω Stereo (per channel) 500W
Ω Stereo (per channel) 275W
Ω 1,000W
Ω 1,400W
XTi 1002
Ω Stereo (per channel) 1,000W
Ω Stereo (per channel) 800W
Ω Stereo (per channel) 475W
Ω 1,600W
Ω 2,000W
XTi 2002
Ω Stereo (per channel) 1,600W
Ω Stereo (per channel) 1,200W
Ω Stereo (per channel) 650W
Ω 2,400W
Ω 3,200W
XTi 4002
Ω Stereo (per channel) 3,000W
Ω Stereo (per channel) 2,100W
Ω Stereo (per channel) 1,200W
Ω 4,200W
Ω 6,000W
XTi 6002

Crown XTi 1002 Specifications

General

8 Ohm Bridge	1000W
4 Ohm Bridge	1400W
Total Harmonic Distortion (THD)	< 0.5%
Signal to Noise Ratio (SNR)	> 100dB
Input Sensitivity	1.4V
Damping Factor	> 500
Dimensions	19" x 3.5" x 12.4" (48.3 cm x 8.9 cm x 31.5 cm)
Frequency Response	20Hz - 20kHz
Input Impedance	20 kOhms (balanced), 10 kOhms (unbalanced)
Protection	Thermal, short circuit, DC
Power Supply	100V-240V ~ 50/60 Hz
Power Output (2 Ohms)	700W
Power Output (4 Ohms)	500W
Power Output (8 Ohms)	275W