To Next PageTo Next Page
Need help?Do you have a question about the Crown XTi 6002 and is the answer not in the manual?
General| Total Harmonic Distortion (THD) | < 0.5% |
|---|---|
| Input Sensitivity | 1.4V |
| Input Impedance | 20 kΩ balanced, 10 kΩ unbalanced |
| Damping Factor | > 500 |
| Power Output (4Ω) | 2100W |
| Power Output (8Ω) | 1200W |
| Frequency Response | 20 Hz - 20 kHz |
| Signal to Noise Ratio | >100dB |
| Connectors | XLR |
| Cooling | Proportional speed fan |
| Protection | Thermal, short circuit, open circuit |
| Weight | 24 lb (10.9 kg) |
| Dimensions | 19" x 3.5" |
Alerts user to risks and important operating instructions.
Warning against opening the unit to avoid electrical shock.
Notes specific wiring requirement for XTi2 Series amplifiers.
Warns about magnetic field interference with sensitive equipment.
Details FCC compliance rules and conditions for operation.
Identifies the issuing company and European representative.
Specifies the product category and model names.
Lists EMC and Safety standards the product adheres to.
Describes the default stereo mode with all processing disabled.
Explains how to configure the amplifier for bridge-mono operation.
Details configuring the amplifier for crossover mode with specific filter settings.
Explains setting up for bridged subwoofer use with a low-pass filter.
Describes configuring the amplifier for subwoofer use with SubHarmonic Synth.
Provides guidelines for maintaining adequate airflow and cooling for the amplifier.
Lists key advanced features of the XTi2 Series amplifiers.
Guides the user on how to effectively utilize the operation manual.
Explains the function of each LED indicator on the front panel.
Identifies and describes cooling vents, gain controls, power button, and navigation buttons.
Describes the liquid crystal display for status and settings.
Mounting points for power cord and AC power connector.
Describes binding post and Speakon output jacks.
Explains XLR input and Link/Out connectors.
Describes HiQnet USB connector and circuit breaker.
Illustrates the navigation path for amplifier settings and options.
Explains how to use the front panel buttons to navigate menus.
Describes different input and output signal routing options.
Details Subharmonic Synth and EQ blocks with filter capabilities.
Explains crossover filters, delay function, and Peakx Plus limiter.
Allows tailoring fan speed to specific applications with different modes.
Provides software visibility of Power Supply Temp and AC Line voltage.
Explains how to disable or lock front panel buttons.
Lists guaranteed power output for various impedances and modes.
Details sensitivity, frequency response, and noise ratio.
Describes physical build, dimensions, and weight.
States warranty validity by country and items excluded.
Safety warning about opening the unit and user-serviceable parts.
Explains worldwide, US, Canada, and factory service procedures.
Provides the shipping address for factory service.
Gives important guidelines for packing the unit for shipment.
Explains estimate approval and payment for non-warranty repairs.
Provides warranty summary and lists excluded items.
Explains Crown's responsibilities for remedying defects.
Guides users on the process for obtaining warranty service.
Disclaims liability for damages and states warranty cannot be altered.
Summarizes warranty terms for regions outside the USA and Canada.
Explains Crown's responsibilities for remedying defects.
Guides users on obtaining warranty service from local importers.
Disclaims liability for damages and states warranty cannot be altered.
Provides Crown's address, phone, fax, and website for registration.
Section for user's personal information for registration.
Section for details about the purchased product.
Instructions for printing and information needed for product return.
Section outlining available payment methods for service.
Covers sensitivity, frequency response, SNR, THD, damping, crosstalk, and max input.
Details input impedance, AC voltage, current draw, and operating temperature.
Describes level controls, power switch, navigation buttons, and LCD screen.
Details EQ, crossover, delay, SubHarmonic Synth, and Peak limiter.
Mentions the availability and user-definability of presets.
Describes input, output, link, and USB connectors.
Covers chassis, panel, cooling, dimensions, and weight.
