To Next PageTo Next Page
Need help?Do you have a question about the Crown XTi 2002 and is the answer not in the manual?
General| Total Harmonic Distortion | < 0.5% |
|---|---|
| Signal to Noise Ratio | > 100 dB |
| Input Sensitivity | 1.4V |
| Channels | 2 |
| Input Impedance | 20 kOhms balanced, 10 kOhms unbalanced |
| Damping Factor | > 500 |
| Power Output (2 Ohms) | 1000W |
| Power Output (4 Ohms) | 800W |
| Power Output (8 Ohms) | 475W |
| Frequency Response | 20Hz - 20kHz |
| Connectors | XLR |
| Cooling | Proportional speed fan |
| Voltage | 100V-240V, 50/60Hz |
| Weight | 18.5 lbs |
Explains safety symbols like lightning bolt and exclamation point.
Warns against opening the unit due to electric shock risk.
Notes that XTi2 Series amplifiers need Class 2 output wiring.
Advises on placement of sensitive equipment due to magnetic fields.
Details FCC compliance rules for the device.
Information about Harman International as the issuer.
Details of the European representative.
Specifies equipment type, family, and model names.
Lists relevant EMC and safety standards the product complies with.
Details the specific safety standard followed.
Certification statement regarding EMC and Low Voltage Directives.
Signature, name, title, and issue date of the declaration.
Explains the factory default stereo mode with DSP off.
Emphasizes reading safety instructions before setup.
Details how to configure the amplifier for bridge-mono operation.
Explains configuring the amplifier for crossover operation.
Details configuring for bridged subwoofer use with a low-pass filter.
Explains configuring for subwoofer use with SubHarmonic Synth.
Provides guidelines for proper cooling and rack mounting.
Caution to disconnect power and turn down controls before installation.
Introduces the XTi2 Series as powerful, innovative amplifiers.
Highlights switch-mode power supply and integrated processing tools.
Discusses Peakx Plus Limiters and Subharmonic Synth enhancements.
Covers fan speed control and system monitoring features.
Lists key advanced features like PeakX Plus Limiters and HiQnet.
Provides guidance on how to use the operation manual.
Details the function of each indicator LED on the front panel.
Identifies the location of the cooling vents.
Describes the front-panel rotary level controls for each channel.
Explains the backlit liquid crystal display and its functions.
Describes the power button and its associated blue LED indicator.
Details the function of the navigation buttons near the LCD.
Warns against connecting outputs to power supplies or mains.
Describes the mounting points for securing the power cord clip.
Explains the binding post outputs and their features, including safety plugs.
Details the fans providing front-to-back airflow for cooling.
Describes the two 3-pin XLR input connectors per channel.
Identifies the AC power input connector.
Explains the 4-pole Speakon connectors and their wiring for stereo/bridge.
Describes the XLR connectors for looping through signals.
Details the Type B USB connector for HiQnet software.
Explains the circuit breaker for overload protection.
Explains front panel controls for signal processing features.
Illustrates the navigation path for front panel settings.
Basic instructions for using Sel, Next, and Prev buttons to navigate menus.
Details Stereo, SUM, and Input Y input modes.
Explains Stereo and Bridge-Mono output modes.
Describes the Subharmonic Synth feature for low-frequency synthesis.
Details Input EQ and Output EQ blocks with filters, frequency, and gain.
Explains HighPass, LowPass, and BandPass filters with various types.
Describes the delay feature for speaker time alignment.
Details the user-defeatable limiter with threshold, attack, and release controls.
Allows tailoring fan speed with Normal, Early, and Full-Speed modes.
Provides software visibility of Power Supply Temperature and AC Line voltage.
Explains how to lock and unlock front panel buttons.
Lists minimum guaranteed power ratings for different impedances and modes.
Details sensitivity, frequency response, signal-to-noise, damping factor, etc.
Describes chassis, front panel, cooling, dimensions, and weight.
Provides initial steps and contacts for servicing needs.
States that warranty is valid only in the country of purchase.
Warns against removing covers and advises professional servicing.
Explains how to obtain service from authorized centers globally.
Details service options in the US and Canada, including factory service.
Provides the address for shipping products to Crown factory service.
Important instructions for packaging products for repair.
Outlines the procedure and timeline for estimate approval.
Details payment terms for repairs outside of warranty.
Provides telephone, facsimile, and website for factory service.
Summarizes the 3-year warranty for new Crown products.
Lists items and conditions not covered by the Crown warranty.
Details how Crown will remedy defects (repair, replacement, refund).
Provides instructions on how to obtain warranty service.
Disclaims liability for incidental or consequential damages.
States that no person can alter the warranty terms.
Crown reserves the right to make design changes without notice.
Outlines the legal rights of the purchaser under the warranty.
Summarizes the 3-year warranty for new Crown products globally.
Lists items and conditions not covered by the warranty worldwide.
Details how Crown will remedy defects worldwide.
Provides instructions for obtaining warranty service via local importers.
Disclaims liability for incidental or consequential damages worldwide.
States warranty terms cannot be altered by individuals.
Crown reserves the right to make design changes globally.
Outlines legal rights of the purchaser worldwide.
Provides contact details for Crown Audio Inc. for registration.
Informs about the availability of online product registration.
Notes that warranty is valid only in the country of purchase.
Section for owner's personal and contact information.
Section for product model, serial number, and purchase date.
Instruction to print the service information form clearly.
Fields for SRA, Model, Serial Number, and Purchase Date.
Fields for customer details and the nature of the problem.
Field to describe other equipment in the user's system.
Note regarding payment for expired warranty service.
Checkboxes for payment options like open account, COD.
Fields for credit card type, account, number, expiry, and name.
Lists key advanced features like PeakX Plus Limiters and HiQnet.
Details power output for XTi 1002, 2002, 4002, 6002 across different loads.
Summarizes key performance metrics like sensitivity and frequency response.
Summarizes front panel controls like Level, Power, and navigation buttons.
Summarizes EQ, Crossover, Delay, Subharmonic Synth, and Limiter features.
Lists XLR inputs, Speakon outputs, binding posts, and USB connector.
Summarizes chassis, front panel, cooling, dimensions, and weight.
