Do you have a question about the Crown XTi 6000 and is the answer not in the manual?
Lists key technical specifications and capabilities of the XTi Series amplifiers.
Provides guidance on effectively using the manual for setup and operation.
Instructions for unpacking and inspecting the amplifier for transit damage.
Guidance on installing the amplifier in racks or stacking, including safety precautions.
Recommendations for maintaining adequate airflow for amplifier performance and longevity.
Advice on selecting appropriate cables and connectors for amplifier audio inputs.
Guidance on selecting speaker wire and connectors, including Speakon® and binding posts.
Instructions for connecting speakers and input sources in stereo mode.
Explains how to configure and wire the amplifier for bridge-mono operation.
Steps for safely connecting the amplifier to the AC power source.
Advice on preventing speaker damage from clipping and subsonic signals.
Step-by-step guide for safely powering on and setting up the amplifier for the first time.
Important safety and operational guidelines to follow during amplifier use.
Explanation of the controls and LED indicators on the amplifier's front panel.
Details the rear panel connections and controls specific to the XTi 1K, 2K, and 4K models.
Details the rear panel connections and controls specific to the XTi 6K model.
Details extensive protection and diagnostic capabilities, including output current limiting, DC protection, and thermal protection.
Explains factory presets, user presets, and how to navigate DSP settings.
Illustrates the navigation path for accessing DSP options and presets.
Basic instructions on using Sel, Prev, Next buttons to navigate menus and presets.
Overview of pre-configured settings for quick setup, like DSP Off, Bridge, Xover, etc.
Describes specific DSP functions like Input Y, Crossover, EQ, Subharmonic Synthesizer.
Details specific DSP parameters like Delay, Limiting, Bridge/Stereo mode, and Lockout function.
Explains button sequences for operating various amplifier functions and presets.
Information on obtaining service from authorized centers outside the US and Canada.
Procedures for obtaining service in the US, including factory and service center options.
Outlines the warranty coverage, period, and terms for Crown products.
Lists conditions and damages not covered by the manufacturer's warranty.
Explains the manufacturer's commitment to remedy defects through repair, replacement, or refund.
States limitations on liability for indirect or secondary damages resulting from product defects.