Do you have a question about the Crown XTi 4000 and is the answer not in the manual?
Frequency Response | 20 Hz - 20 kHz, +0/-1 dB |
---|---|
Total Harmonic Distortion | < 0.5% |
Input Impedance | 20k ohms (balanced), 10k ohms (unbalanced) |
Power Output (Stereo Mode) | 1200W per channel at 2 ohms |
Power Output (Bridged Mono Mode) | 2400W @ 4 Ohms |
Signal to Noise Ratio | > 100 dB |
Input Sensitivity | 1.4V |
Damping Factor | > 500 |
Cooling | Proportional speed fan |
Protection | overload |
Voltage | 100-240V, 50/60 Hz |