9 SIGNAL
Squelch mode
setup
SQ
When current channel received matching RF
signals, transceiver can hear the talking from the
other party.
CTCSS/DCS
When current channel received matching RF
signals and matching CTCSS/DCS signaling,
transceiver can hear the talking from the other party.
TONE
When current channel received matching RF
signals and matching optional signaling, transceiver
can hear the talking from the other party.
CT&TO
When current channel received matching RF
signals + matching optional signaling + matching
CTCSS/DCS signaling, transceiver can hear the
talking from the other party.
CT/TO
When current channel received matching RF
signals, or matching optional signaling, or
matching CTCSS/DCS signaling, transceiver can
hear the talking from the other party.
10 STEP
Frequency step
size setup
2.5K-50K 9 options in total
11 W/N
Wide / Narrow
Band Setup
25K/12.5K Wide band/Narrow band
12 REV
Frequency
Reverse
ON
Turn on Frequency reverse function, TX and RX
frequency of current channel will be interchanged.
OFF Close Frequency reverse function.
FUNCTION MENU SETUP
24
Menu
No.
LCD Display Function Options Description
To Next Page
Loading...
