CRT MICRON U/V - Timer and Frequency Settings; 7.10 Dual Watch setup; 7.11 Backlight Brightless Setup; 7.12 TOT(Time Out Timer)

18
1. Enter FUNCTION MENU list, choose No.10 function
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting
ON: Enable Dual Watch function
OFF: Disable Dual Watch function
4. Press [PUSH] button or [P3] key to store setting and exit.
1. Enter FUNCTION MENU list, choose No.11 function
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose brightless level, 1-3 level available.
4. Press [PUSH] button or [P3] key to store setting and exit.
The time-out timer limits continuous transmitting time. When transmit time last over
programmed value, the transmitting will stop and emit a prompt.
1.
Enter FUNCTION MENU list, choose No.12 function
2. Press [PUSH] button, the menu value in LCD turns to green color
3. Turn channel knob to choose wanted setting.
1-30: 1-30 minutes range available by 1 minute/step
OFF: Turn off TOT function
4.
Press [PUSH] button or [P3] key to store setting and exit.
Once APO is activated, the transceiver will be automatically switched off when the pre-set
timer running out.
1. Enter FUNCTION MENU list, choose No.13 function
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting
30Min: Automatical power off after 30 minutes.
60Min: Automatical power off after 60 minutes.
120Min:
Automatical power off after 120 minutes
OFF: Automatical power off function is off
4. Press [PUSH] button or [P3] key to store setting and exit
This function uses to start repeater. It needs a certain intensity Pilot Frequency to start
dormant repeater. As usual, no need to send pilot frequency again once repeater started.
1. Enter FUNCTION MENU list, choose No.14 function
2. Press [PUSH] button, the menu value in LCD turns to green color.
3. Turn channel knob to choose wanted setting
1000Hz: Pilot frequency 1000Hz
7.10 Dual Watch setup
7.11 Backlight Brightless Setup
7.12 TOT(Time Out Timer)
7.13 APO (Automatic Power OFF)
7.14 Pilot Frequency
1450Hz: Pilot frequency 1450Hz