Crucial 2.5-inch Solid State Drive User Manual

Install Guide
Crucial
®
2.5-inch Solid State Drive
Equipment Needed
• Crucial
®
2.5-inch SSD
• Non-magnetic tip screwdriver
• Your system’s owner’s manual
Special Considerations
If your Crucial SSD will become your new primary storage
device, we recommend the use of data migration (cloning)
software to move old files from your existing drive onto your
new Crucial SSD. Data migration software is available at
Crucial.com as part of our Easy Desktop Install Kit or Easy
Laptop Install Kit packages. Data migration software is also
available from a variety of third party vendors.
Precautions
• To protect your system’s components from static damage
during the installation process, touch any of the unpainted
metal surfaces on your computer’s frame before handling
and installing your SSD.
• To protect your SSD, do not touch the connectors on the
drive.
• Do not open the drive enclosure. Doing so will void your
warranty.
Laptop Install..............................................................................page 2
Desktop Install............................................................................page 4
1

Crucial 2.5-inch Solid State Drive Specifications

General

Form Factor	2.5-inch
Sequential Read Speed	Up to 560 MB/s
Sequential Write Speed	Up to 510 MB/s
Operating Temperature	0°C to 70°C
Storage Temperature	-40°C to 85°C
Dimensions	100mm x 69.85mm x 7mm
Interface	SATA 6Gb/s
NAND Type	3D NAND
Random Write Speed	Up to 90, 000 IOPS
Warranty	5 years
Encryption	AES 256-bit
Shock Resistance	1500G

Summary

SSD Installation Guide

Precautions

Safety instructions to protect system components and the SSD from damage during installation.

Laptop Installation

Step-by-step guide for installing the Crucial 2.5-inch SSD into a laptop computer.

Desktop Installation

Step-by-step guide for installing the Crucial 2.5-inch SSD into a desktop computer.