3
READ CAREFULLY BEFORE CONNECTING ELECTRICAL CABLES.
• Do not place the instrument in wet or dirty environments.
• Do not remove the protective coverings.
• Do not touch the AC plug with wet hands.
FACTORY DEFAULTS
• The CRUMAR Mojo accepts voltages from 100V to 240V AC 50-60Hz through the
original power supply. Be sure that local electrical standards are compliant with the
instrument.
• The serial number, international standards and other informations are printed on the
plate positioned in the back panel near power inlet and in the power supply.
DO NOT REMOVE THE TOP PANEL FOR ANY REASON.
IN THE EVENT THAT SUPPORT OR TECHNICAL ASSISTANCE IS REQUIRED,
PLEASE CONTACT YOUR CRUMAR DEALER OR AN AUTHORIZED CRUMAR
TECHNICAL CENTER.
THE MAIN POWER CONNECTION IS LOCATED ON THE REAR OF THE INSTRUMENT
ON THE LEFT SIDE. THE POWER BUTTON IS ON THE TOP OF THE INSTRUMENT
ON THE LEFT SIDE.
BEFORE CONNECTING THE MAIN POWER CABLE, CONNECT ALL OTHER CABLES
FIRST.
To Next Page
Loading...
